Microfreak/Preset/401 Init

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 401 over USB on October 25, 2026 with mise run microfreak:download --slot 401. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 401 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/401 Init/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Harmo. Microfreak/UG/06 Dig Osc/03 Types/04 Harmo
    • Content: 0.426. Sculpting: 0.551. Chorus: 0.340.
    • Keyboard octave: -1. Glide: 0.000.

  • Filter

    • Band-pass filter. Saved cutoff: 0.522; resonance: 0.000. Microfreak/UG/07 Filter/01 Modifying Sound/02 Band Pass Filter

  • Envelopes

    • Main envelope: attack 0.224, decay/release 0.259, sustain 1.000. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Run. Stored RiseLvl 0.216, RiseSlp 0.500, FallLvl 0.163, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Triangle, clock sync on; stored division code: 4. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • LFO → Wave: +0.104.
    • Cycling Envelope → Timbre: +0.229.
    • Cycling Envelope → Cutoff: −0.025.
    • ENV → Cutoff: +0.082.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: on.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/304 Saw Vox (Factory 2.1 slot 51); 12 controls differ.
    • Oscillator type: Harmo (factory Vocoder).
    • Octave: -1 (factory 0).
    • Filter type: BPF (factory LPF).
    • Cutoff: 0.522 (factory 1.000).
    • Rise: 0.216 (factory 0.163).
    • Attack: 0.224 (factory 0.000).
    • LFO shape: Triangle (factory Sine).
    • Arp: on (factory off).
    • Matrix LFO → Wave: +0.104 (factory +0.000).
    • Matrix Cycling Envelope → Timbre: +0.229 (factory +0.000).
    • Matrix Cycling Envelope → Cutoff: −0.025 (factory +0.000).
    • Matrix ENV → Cutoff: +0.082 (factory +0.000).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.