Microfreak/Preset/400 Init

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 400 over USB on October 25, 2026 with mise run microfreak:download --slot 400. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 400 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/400 Init/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Bass. Microfreak/UG/06 Dig Osc/03 Types/14 BASS
    • Saturate: 0.711. Fold: 0.000. Noise: 0.012.
    • Keyboard octave: 0. Glide: 0.168.

  • Filter

    • Low-pass filter. Saved cutoff: 0.543; resonance: 0.450. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.198, decay/release 0.255, sustain 0.463. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Run. Stored RiseLvl 0.163, RiseSlp 0.500, FallLvl 0.163, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sine, clock sync on; stored division code: 10. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • ENV → Timbre: +0.649.
    • ENV → Cutoff: +0.050.
    • PRESSURE → Cutoff: −0.109.
    • PRESSURE → Assign 1 → Noise: +0.978.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: off.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/172 Snare Four (Factory 2.0 slot 145); 11 controls differ.
    • Oscillator type: Bass (factory Noise).
    • Glide: 0.168 (factory 0.000).
    • Cutoff: 0.543 (factory 0.629).
    • Resonance: 0.450 (factory 0.000).
    • Attack: 0.198 (factory 0.000).
    • Decay/Release: 0.255 (factory 0.136).
    • Sustain: 0.463 (factory 0.000).
    • Matrix ENV → Timbre: +0.649 (factory +0.000).
    • Matrix ENV → Cutoff: +0.050 (factory +1.000).
    • Matrix PRESSURE → Cutoff: −0.109 (factory +0.000).
    • Matrix PRESSURE → Assign 1: +0.978 (factory +0.000).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.