Microfreak/Preset/394 Jing A

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 394 over USB on October 25, 2026 with mise run microfreak:download --slot 394. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 394 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/394 Jing A/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Wavetable. Microfreak/UG/06 Dig Osc/03 Types/03 Wavetable
    • Table: 0 (stored choice code). Position: 0.000. Chorus: 1.000.
    • Keyboard octave: -2. Glide: 0.000.

  • Filter

    • Low-pass filter. Saved cutoff: 1.000; resonance: 0.000. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.000, decay/release 0.259, sustain 1.000. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Loop. Stored RiseLvl 0.425, RiseSlp 0.500, FallLvl 0.606, FallSlp 0.500, Hold 0.734, Amount 0.690. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sine, clock sync on; stored division code: 10. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • Cycling Envelope → Assign 1 → Chorus: −0.951.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: off.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/304 Saw Vox (Factory 2.1 slot 51); 11 controls differ.
    • Oscillator type: Wavetable (factory Vocoder).
    • Octave: -2 (factory 0).
    • Cycling Envelope mode: Loop (factory Run).
    • Rise: 0.425 (factory 0.163).
    • Fall: 0.606 (factory 0.163).
    • Hold/Sustain: 0.734 (factory 0.000).
    • Cycling Envelope amount: 0.690 (factory 1.000).
    • Paraphonic: off (factory on).
    • Seq: on (factory off).
    • Arp/Seq rate: 0.414 (factory 0.412).
    • Matrix Cycling Envelope → Assign 1: −0.951 (factory +0.000).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.