Microfreak/Preset/377 TMF.24.12.04.D

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 377 over USB on October 25, 2026 with mise run microfreak:download --slot 377. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 377 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/377 TMF.24.12.04.D/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: BasicWaves. Microfreak/UG/06 Dig Osc/03 Types/01 BasicWaves
    • Morph: 0.309. Sym: 0.641. Sub: 0.516.
    • Keyboard octave: -1. Glide: 0.158.

  • Filter

    • Low-pass filter. Saved cutoff: 0.665; resonance: 0.354. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.359, decay/release 0.506, sustain 0.589. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Loop. Stored RiseLvl 0.078, RiseSlp 0.500, FallLvl 0.283, FallSlp 0.500, Hold 0.251, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sawtooth, clock sync off; stored normalized rate: 0.069. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • Cycling Envelope → Timbre: +0.750.
    • ENV → Cutoff: −0.253.
    • KEY/ARP → Cutoff: +1.000.
    • Cycling Envelope → Assign 1 → Sub: −0.502.
    • LFO → Assign 1 → Sub: +1.000.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: on.

  • Customized controls

    • No factory preset is close. The nearest factory payload, Microfreak/Preset/135 No Sleep (Factory 2.0 slot 111), differs in 20 controls.

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.