Microfreak/Preset/372 TMF.24.11.25.B

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 372 over USB on October 25, 2026 with mise run microfreak:download --slot 372. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 372 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/372 TMF.24.11.25.B/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: BasicWaves. Microfreak/UG/06 Dig Osc/03 Types/01 BasicWaves
    • Morph: 0.256. Sym: 0.000. Sub: 0.000.
    • Keyboard octave: 0. Glide: 0.000.

  • Filter

    • Low-pass filter. Saved cutoff: 1.000; resonance: 0.000. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.032, decay/release 0.323, sustain 0.320. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Run. Stored RiseLvl 0.163, RiseSlp 0.500, FallLvl 0.163, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sine, clock sync on; stored division code: 10. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • All saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: on.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/304 Saw Vox (Factory 2.1 slot 51); 5 controls differ.
    • Oscillator type: BasicWaves (factory Vocoder).
    • Attack: 0.032 (factory 0.000).
    • Decay/Release: 0.323 (factory 0.259).
    • Sustain: 0.320 (factory 1.000).
    • Seq: on (factory off).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.