Microfreak/Preset/353 Work

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 353 over USB on October 25, 2026 with mise run microfreak:download --slot 353. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 353 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/353 Work/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Scan Grains. Microfreak/UG/06 Dig Osc/03 Types/19 Scan Grains
    • Scan: 0.273. Density: 0.207. Chaos: 0.262.
    • Keyboard octave: 0. Glide: 0.101.

  • Filter

    • Low-pass filter. Saved cutoff: 0.327; resonance: 0.109. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.526, decay/release 0.401, sustain 0.560. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Run. Stored RiseLvl 0.564, RiseSlp 0.500, FallLvl 0.311, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sawtooth, clock sync off; stored normalized rate: 0.388. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • ENV → Wave: −0.244.
    • ENV → Timbre: −0.042.
    • PRESSURE → Timbre: −0.274.
    • ENV → Cutoff: +0.118.
    • LFO → Cutoff: +0.048.
    • PRESSURE → Cutoff: +0.216.
    • PRESSURE → Assign 1 → Filter Resonance: +0.730.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: on.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/247 Laity (Factory 3.0 slot 315); 12 controls differ.
    • Oscillator type: Scan Grains (factory SawX).
    • Glide: 0.101 (factory 0.000).
    • Octave: 0 (factory +1).
    • Cutoff: 0.327 (factory 0.409).
    • Resonance: 0.109 (factory 0.000).
    • Rise: 0.564 (factory 0.167).
    • Fall: 0.311 (factory 0.163).
    • Attack: 0.526 (factory 0.000).
    • LFO shape: Rising Sawtooth (factory Triangle).
    • LFO sync: off (factory on).
    • LFO rate: 0.388 (factory 0.148).
    • Arp/Seq rate: 0.413 (factory 0.412).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.