Microfreak/Preset/351 Hoit

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 351 over USB on October 25, 2026 with mise run microfreak:download --slot 351. Two consecutive reads returned the same file.
    • The parameter payload matches no MIDI Control Center factory archive.
    • Download the slot 351 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/351 Hoit/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Vocoder. Microfreak/UG/06 Dig Osc/03 Types/22 Vocoder
    • Wave: 0.000. Timbre: 0.460. Shape: 0.540.
    • Keyboard octave: -1. Glide: 0.000.

  • Filter

    • Low-pass filter. Saved cutoff: 1.000; resonance: 0.000. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.000, decay/release 0.259, sustain 1.000. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Run. Stored RiseLvl 0.163, RiseSlp 0.500, FallLvl 0.334, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sine, clock sync off; stored normalized rate: 0.699. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • PRESSURE → Assign 1 → Glide: +0.404.
    • LFO → Assign 2 → Shape: +0.282.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: off.

  • Customized controls

    • Compared with the nearest factory payload, Microfreak/Preset/313 Tremolo Saw (Factory 2.1 slot 60); 1 control differs.
    • Fall: 0.334 (factory 0.163).

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.