Microfreak/Preset/259 Infini Pad

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 259 over USB on October 25, 2026 with mise run microfreak:download --slot 259. Two consecutive reads returned the same file.
    • The parameter payload matches the MIDI Control Center archives Factory 3.0, Factory 6.0 (Factory 3.0 slot 326, Factory 6.0 slot 19). Comparison used mise run microfreak:compare.
    • Download the slot 259 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/259 Infini Pad/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Bass. Microfreak/UG/06 Dig Osc/03 Types/14 BASS
    • Saturate: 0.000. Fold: 0.135. Noise: 0.054.
    • Keyboard octave: 0. Glide: 0.000.

  • Filter

    • Low-pass filter. Saved cutoff: 0.101; resonance: 0.512. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.669, decay/release 0.579, sustain 0.781. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Loop. Stored RiseLvl 0.213, RiseSlp 0.500, FallLvl 0.637, FallSlp 0.500, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sawtooth, clock sync on; stored division code: 8. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • Cycling Envelope → Pitch: +0.004.
    • PRESSURE → Wave: +0.170.
    • ENV → Timbre: +0.968.
    • PRESSURE → Timbre: +0.486.
    • ENV → Cutoff: +0.328.
    • PRESSURE → Cutoff: +0.187.
    • LFO → Assign 1 → Noise: +0.203.
    • PRESSURE → Assign 2 → Noise: −0.125.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: on.

  • Performance and session context

    • Held notes swell in slowly. The main envelope adds Fold (+0.968) and opens the cutoff (+0.328) as each note opens. Key pressure adds Saturate (+0.170), Fold (+0.486) and cutoff (+0.187) and lowers Noise through Assign 2 (−0.125); the synced sawtooth LFO adds Noise through Assign 1 (+0.203).
    • The PRESSURE matrix row follows the instrument's global expression setting, which the export does not record.
    • Turning Shape up raises Noise and makes the pad work as a noisy bass in the low register, as heard from 05:15 in GitP/A/Session/26/11/01-Sun.
    • In GitP/A/Session/26/11/06-Fri it was the only preset for the whole session: low C and G pedals swelled with key pressure, a high G5, and a C-major third at 22:39. Recorded knob changes covered Fold, Saturate, Noise, cutoff and resonance, filter amount, and the main and cycling envelopes. A read of slot 259 on November 7, 2026 again matched the October 25 export.
    • In GitP/A/Session/26/11/01-Sun the Launchpad Pro played it from 00:00 to 18:17. Recorded knob changes covered the main and cycling envelopes, filter amount, Spice, LFO rate and the three oscillator controls, with brief cutoff and resonance changes. A read of slot 259 after the session matched the October 25 export, so the slot still holds the factory sound. The session MIDI holds those knob changes as controller messages.

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.