Microfreak/Preset/237 Funk Blaster

• Notes

  • Saved export and provenance

    • Saved export: read from the device's slot 237 over USB on October 25, 2026 with mise run microfreak:download --slot 237. Two consecutive reads returned the same file.
    • The parameter payload matches the MIDI Control Center archives Factory 3.0, Factory 6.0 (Factory 3.0 slot 306, Factory 6.0 slot 325). Comparison used mise run microfreak:compare.
    • Download the slot 237 capture. It is the raw device format (header plus data packets), not an .mbp file; see Microfreak/Preset/237 Funk Blaster/Asset/Device-Read-2026-10-25/bin.

  • Oscillator

    • Model: Bass. Microfreak/UG/06 Dig Osc/03 Types/14 BASS
    • Saturate: 0.001. Fold: 1.000. Noise: 0.212.
    • Keyboard octave: -3. Glide: 0.130.

  • Filter

    • Low-pass filter. Saved cutoff: 0.115; resonance: 0.846. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter

  • Envelopes

    • Main envelope: attack 0.154, decay/release 0.366, sustain 0.000. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
    • Cycling Envelope mode: Env. Stored RiseLvl 0.288, RiseSlp 0.248, FallLvl 0.717, FallSlp 0.996, Hold 1.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope

  • LFO

    • Sample-and-Hold Filtered, clock sync on; stored division code: 7. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate

  • Modulation matrix

    • Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
    • Cycling Envelope → Wave: +0.740.
    • Cycling Envelope → Timbre: +0.985.
    • ENV → Cutoff: +0.750.
    • PRESSURE → Cutoff: −0.436.
    • LFO → Assign 1 → Unison Spread: +0.003.
    • All other saved matrix amounts are zero.

  • Voice and keyboard

    • Paraphonic mode: off.

  • Evidence and interpretation

    • Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
    • The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
    • Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.