Microfreak/Preset/146 Snare Seq 1
Properties
- logseq-entity
- Logseq/Entity/Preset/Synth/Microfreak
- preset-synth-microfreak-number
- 146
- preset-synth-microfreak-name
- Snare Seq 1
- preset-synth-microfreak-category
- Logseq/Entity/Preset/Synth/Microfreak/Frontmatter/preset-synth-microfreak-category/Sequence
- preset-synth-microfreak-initialized
- false
- preset-synth-microfreak-on-device
- true
- preset-synth-origin
- Logseq/Entity/Preset/Synth/Frontmatter/preset-synth-origin/Factory
- preset-synth-microfreak-oscillator-type
- Microfreak/UG/06 Dig Osc/03 Types/13 Noise
- preset-synth-microfreak-parameter-payload-sha256
- 0a1a5f638e9948239582e1c11b4d3c5a9dc4ff332cf11b680cf9a07fcb188f7b
- preset-synth-file-sha256
- 66a8548953376555361090a2f89fcd453b46d01f63fea84ed883c8e30eec0cb6
Notes
Saved export and provenance
- Saved export: read from the device's slot 146 over USB on October 25, 2026 with
mise run microfreak:download --slot 146. Two consecutive reads returned the same file. - The parameter payload matches the MIDI Control Center archives Factory 2.0, Factory 2.1, Factory 3.0 (Factory 2.0 slot 121, Factory 2.1 slot 223, Factory 3.0 slot 223). Comparison used
mise run microfreak:compare. - Download the slot 146 capture. It is the raw device format (header plus data packets), not an
.mbpfile; see Microfreak/Preset/146 Snare Seq 1/Asset/Device-Read-2026-10-25/bin.
- Saved export: read from the device's slot 146 over USB on October 25, 2026 with
Oscillator
- Model: Noise. Microfreak/UG/06 Dig Osc/03 Types/13 Noise
- Wave: 0.309. Timbre: 0.142. Shape: 0.201.
- Keyboard octave: 0. Glide: 0.000.
Filter
- Low-pass filter. Saved cutoff: 0.311; resonance: 0.381. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter
Envelopes
- Main envelope: attack 0.000, decay/release 0.072, sustain 0.000. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
- Cycling Envelope mode: Env. Stored RiseLvl 0.000, RiseSlp 0.500, FallLvl 0.223, FallSlp 0.192, Hold 0.000, Amount 1.000. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope
LFO
- Sine, clock sync on; stored division code: 1. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate
Modulation matrix
- Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
- Cycling Envelope → Pitch: +0.996.
- ENV → Timbre: +0.861.
- ENV → Cutoff: +0.682.
- All other saved matrix amounts are zero.
Voice and keyboard
- Paraphonic mode: off.
Evidence and interpretation
- Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
- The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
- Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.