Microfreak/Preset/029 Number Station
Properties
- logseq-entity
- Logseq/Entity/Preset/Synth/Microfreak
- preset-synth-microfreak-number
- 029
- preset-synth-microfreak-name
- Number Station
- preset-synth-microfreak-category
- Logseq/Entity/Preset/Synth/Microfreak/Frontmatter/preset-synth-microfreak-category/SFX
- preset-synth-microfreak-initialized
- false
- preset-synth-microfreak-on-device
- true
- preset-synth-origin
- Logseq/Entity/Preset/Synth/Frontmatter/preset-synth-origin/Factory
- preset-synth-microfreak-oscillator-type
- Microfreak/UG/06 Dig Osc/03 Types/11 Speech
- preset-synth-microfreak-parameter-payload-sha256
- 3da4a81275b7844f418b1118993b4f99a881f746a48e1daac7b47bce3a45d8a2
- preset-synth-file-sha256
- b2f53f47027c077151d3be14f137b4db3a687dc2aaad09ca206e0c5376527e9c
Notes
Saved export and provenance
- Saved export: read from the device's slot 29 over USB on October 25, 2026 with
mise run microfreak:download --slot 29. Two consecutive reads returned the same file. - The parameter payload matches the MIDI Control Center archives Factory 1.0, Factory 1.1, Factory 2.1, Factory 3.0, Factory 6.0 (Factory 1.0 slot 105, Factory 1.1 slot 105, Factory 2.1 slot 117, Factory 3.0 slot 117, Factory 6.0 slot 431). Comparison used
mise run microfreak:compare. - Download the slot 29 capture. It is the raw device format (header plus data packets), not an
.mbpfile; see Microfreak/Preset/029 Number Station/Asset/Device-Read-2026-10-25/bin.
- Saved export: read from the device's slot 29 over USB on October 25, 2026 with
Oscillator
- Model: Speech. Microfreak/UG/06 Dig Osc/03 Types/11 Speech
- Type: 0.607. Timbre: 0.499. Word: 0.633.
- Keyboard octave: +1. Glide: 0.000.
Filter
- Low-pass filter. Saved cutoff: 0.932; resonance: 0.201. Microfreak/UG/07 Filter/01 Modifying Sound/01 Low Pass Filter
Envelopes
- Main envelope: attack 0.000, decay/release 0.244, sustain 0.999. Amp Mod is on, so the main envelope controls loudness. Microfreak/UG/09 Envelope Gen/03 Envelope Stages
- Cycling Envelope mode: Run. Stored RiseLvl 0.110, RiseSlp 0.500, FallLvl 0.111, FallSlp 0.500, Hold 0.000, Amount 0.495. Microfreak/UG/09 Envelope Gen/06 Cycling Envelope
LFO
- Sample-and-Hold Filtered, clock sync off; stored normalized rate: 0.630. Microfreak/UG/08 LFO/01 LFO Shape · Microfreak/UG/08 LFO/02 LFO Rate
Modulation matrix
- Amounts use the signed normalized range −1…+1. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
- LFO → Assign 1 → Word: +0.500.
- PRESSURE → Assign 2 → Filter Cutoff: −0.300.
- PRESSURE → Assign 3 → Filter Resonance: +0.585.
- All other saved matrix amounts are zero.
Voice and keyboard
- Paraphonic mode: off.
Performance and session context
- Hold a note to let the filtered random LFO move the Speech Word selector. The oscillator keeps changing syllables while pitch stays under the keyboard; the Speech guide explains how Type chooses a library and Word scans within it. Microfreak/UG/06 Dig Osc/03 Types/11 Speech
- The saved pressure routes lower the low-pass cutoff and raise resonance together, emphasizing a narrower, more muffled voice as expression increases. The PRESSURE source follows the global pressure-or-velocity setting, which the preset export cannot establish. Microfreak/UG/05 Connections/02 Matrix and Encoder/01 Sources and Destinations
- The October 25 capture establishes this saved factory baseline. Knob changes and the global expression mode during a later performance need the recording or captured MIDI.
Evidence and interpretation
- Values describe saved base settings before modulation. Controls use normalized 0…1 values unless a stored choice code is shown; they are not OLED percentages, hertz or milliseconds.
- The saved-parameter inspector preserves the original fields. Oscillator interpretation assumes the documented firmware 5 layout; firmware is not detected from the export.
- Matrix assignments follow the Freakout live map. Mode, LFO shape, filter type and octave labels follow the MicroFreak Reader definitions.